Box Four 8S Wide Multi Shift Groupset
Please refer to the installation video available at www.boxcomponents.com/serviceDerailleur
No, Shimano direct mount hangers are proprietary and are not compatible with Box derailleurs.
No, traditional 8 speed systems use a Cable Pull that is not compatible with Prime 9.
No, Box Prime 9 derailleurs are not currently compatible with drop bar shifters, but we do offer a clamp for our shifters to mount on some 31.8mm drop handle bars.
We suggest removing the derailleur from the bike and using a soft bristle brush or rag with soapy water or a mild degreaser. We do not recommend pressure washing, strong solvents or de-greasers as they could degrade the surface coating.
Please see our installation video at boxcomponents.com/serviceShifter
Yes. All Box One Twin Lever Shifters come with a stainless steel shift cable.
To remove it, use a Phillips head screwdriver and turn it counter-clockwise a quarter turn You can then push the cap out by applying pressure to the cable from the other side. Please Note: The Cable Port is not a screw that un-threads from the cable port if you turn the cable port screw more than 90 degrees damage may occur.
No, traditional 8 speed systems use a Cable Pull that is not compatible with Box Four components.Cassette
No this will only work with a HG splined Shimano 9-10-11 speed freehub body.
No, The Box Four Prime 9 Cassette is optimized for use only with Box Four Prime 9 Components; running other component variations could result in poor performance.
We suggest removing the cassette from the wheel and using a soft bristle brush with soapy water or a mild degreaser. We do not recommend pressure washing, strong solvents or degreasers as they could degrade the surface coating.